Operation Manual

Clock Source

Interconnected digital audio equipment must always use the same reference clock source. Your

Clarett interface is able to synchronise from three sources:

• Internal – the internally generated reference clock. This is the default selection.

• S/PDIF – the embedded clock signal in a signal at the S/PDIF IN connector.

• ADAT – the embedded clock signal in a signal at the OPTICAL IN connector.

Whichever source is selected, the clock signal is available at the Clarett’s WORD CLOCK OUT rear

panel BNC socket to allow synchronisation with other digital equipment.

TROUBLESHOOTING

For all troubleshooting queries, please visit the Focusrite Answerbase at

www.focusrite.com/answerbase where you will ﬁnd articles covering numerous

troubleshooting examples.

Focusrite is a registered trade mark. Focusrite Control and Clarett are trade marks of Focusrite

Audio Engineering Limited.

All other trade marks and trade names are the property of their respective owners.