Operation Manual

26
DEVICE SETTINGS PAGE
Clarett interfaces have a variety of hardware functions that are operated from Focusrite Control,
rather than by physical controls on the unit itself.
The Device Settings page gives you access to these functions. The page for the Clarett 8Pre
looks like this:
If you have a different Clarett model, most of the functionality will be the same, but fewer switches
may be visible because your interface has fewer channels.
Air
Each input channel of your Clarett interface has a switchable AIR function; this subtly modifies the
pre-amp’s frequency response to model the impedance and resonance characteristics of Focusrite’s
classic transformer based ISA mic Pre-amps. See your Clarett User Guide for more details.
AIR can be switched in and out of circuit independently for each channel by clicking the AIR buttons.
The LEDs on the unit’s front panel will also confirm that AIR has been selected for each channel.