Operation Manual

22
Stand-alone mixer
Once the Clarett’s internal mixer has been configured by Focusrite Control, that configuration is
retained by the hardware even after you remove the Thunderbolt cable and switch the unit off. This
means that you can make use of the Clarett’s excellent analogue performance in a live situation,
without necessarily needing to connect a computer.
An example of this application would be as an on-stage keyboard mixer. Multiple keyboards can be
connected to the Clarett’s inputs, and mixed together to the Monitor Outputs. The relative levels of
each keyboard can be adjusted from the front panel.
The setup shown above would configure the mixer as described above; because the Clarett retains
its last configuration, the unit can then be switched off, and used at the venue as a stand-alone unit.