Operation Manual

19
Digital
This Preset is a useful starting point when using a separate ADAT-equipped microphone
pre-amplifier such as the Focusrite OctoPre Mk II. When used with the Clarett 8Pre it enables ten
digital input channels, eight sourced from the ADAT input port and two from the S/PDIF input. DAW
tracks 1 and 2 are also enabled as a stereo channel. The sum of the inputs is routed to the same
pairs of outputs as with the analogue Presets described above.
All other Clarett outputs are sourced directly from the corresponding DAW playback tracks, as per
the Direct Routing table on page 16.
Empty
This may often be the most convenient preset to use as it clears the existing mixer to allow the user
to start building his/her own configuration as required.
On the Clarett 8Pre, Monitor Out 1 and 2 and Line Outs 7 to 10 (paralleled as the headphone outputs)
are set to receive a custom mix; all other outputs are sourced from individual DAW tracks, as with
the other Presets.