Operation Manual

2 Channel Analogue

This is the Preset to use when using the Clarett as your analogue recording “front end”. The Preset

conﬁgures the Clarett’s routing with Analogue Inputs 1 and 2 available as HARDWARE INPUTS and

DAW tracks 1 and 2 available as a stereo channel in the SOFTWARE (DAW) PLAYBACK section.

For example, on the Clarett 8Pre, the summed output of these input channels is routed to the Monitor

Outputs 1 and 2, and also to Line Outputs 7 and 8, and 9 and 10, as a stereo pair in all cases. On this

model, Headphone Outputs 1 and 2 follow Line Outputs 7/8 and 9/10 respectively, with their own

front panel headphone levels controls. This setup is ideal for recording a guitarist and a vocalist to a

drum track already recorded on the DAW, as it enables each to have an individual mix of the drums

and each other.

As more tracks are recorded, simply add additional DAW playback tracks to the mix.

All other Clarett outputs are sourced directly from the corresponding DAW playback tracks, as per

the Direct Routing table on page 16.