Operation Manual

Example Systems
Control 2802 Operating Manual 45
Example System 4: 24 Channel Mixing Platform
The nal example illustrates a heavily connected Control 2802 ready for medium to large scale mixdown purposes.
There are 24 outputs from the DAW interfaces which are used for mixing / line-level summing with a few useful tricks.
The rst eight channels feed the standard DAW Inputs and can be used to access the main automation channels on Control 2802
when selecting DAW input mode. These eight channels can also access the outboard selection via the switched insert points.
The following eight outputs (9–16) feed the Control 2802 line inputs and will feed the alternative cue input.
Here these do not go directly to the main mix bus via the cue assign control, instead they are fed into a subgroup compressor via the
main cue outputs (channels 9–16), which is then returned into the DAW Mix Input to re-join the main mix bus.
Here you could compress your drum mix for example. The remaining channels (17–24) feed the summing input which routes directly
into the main mix bus.
Control 2802