Operation Manual
44 Control 2802 Operating Manual
Example Systems
Example System 3: 16 Channel Tracking Platform
In this example a second pair of monitors are added to provide a useful reference for judging midrange and balances.
In order to provide 16 microphone inputs for tracking, an extra ISA 828 preamplier is used. This is routed to a 16 channel capable
soundcard / interface.
These eight feeds are sent back to the eight-channel summing input on Control 2802, allowing monitoring of these channels and
access to the cue section.
In this example, the analogue line outputs of the pre-amplier are also routed to the Control 2802 line inputs, allowing optional
access to the direct output system here (note that they would override the console microphone inputs at that point).
If you wish to work it another way, an all analogue, zero-latency monitor mix could be formed by feeding the analogue output of the
preamplier into the DB25 DAW Input connection. Using the alternative cue input, you could balance these extra eight inputs using
the cue pan and level controls accessing both the cue output section and main mix bus for headphone and control room monitoring.
Control 2802