Datasheet

RedNet HD32R is a 1U, 19in rack-mount Dante interface that allows Pro Tools|HD users
direct access to the full benefi ts of the Dante digital audio networking system, including
its uniquely fl exible network topology and premium quality audio interfaces. The Pro Tools
system is connected to the HD32R via standard Mini DigiLink ports.
PSU and Ethernet redundancy
Dual Ethernet ports with locking etherCON connectors are provided, with several
operating modes including daisy-chaining and redundancy confi rmed by front-panel
indicators. Two separate power supplies with fault detection capability are included,
with separate power input sockets (with retaining clips) on the rear of the unit. Power
state is indicated both remotely and on the front panel. The HD32R features a rugged,
roadworthy exterior and high internal build quality. In addition, it offers a compact 1U
rack-mount form factor for a full 32 channels of I/O.
Why Dante and RedNet for Pro Tools|HD?
Focusrite’s RedNet was the fi rst to offer IP networked audio interfaces for recording
studio, education, live sound and broadcast workfl ows, combining superb audio interfaces
with the tried and tested reliability of the Dante Ethernet-based audio networking system
from Audinate. Dante has been in use in the live sound industry for years in the most
exacting applications without missing a single sample.
Dante networking offers a powerful combination of features that make it ideal for any
Pro Tools|HD production environment. Focusrite’s superb DC-coupled mic preamplifi ers
and precision digital conversion ensure the very highest audio quality I/O, while Dante’s
About RedNet
Launched in 2012, Focusrite's RedNet range was one of the fi rst to adopt the Dante
audio-over-IP network as the infrastructure for a new and versatile range of products.
Since then, RedNet has become increasingly popular for a diverse range of audio
applications, from theme parks to opera, from studio to major live events.
RedNet has become known for its quality and reliability – the latter a feature that is
brought even more to the fore by the inclusion of redundancy capabilities – as well as
proving exceptionally simple to operate and offering the best-sounding audio-over-IP
solution available and full operability with other Dante devices.
Key Features
• Allows Dante Ethernet-based audio
networking products to interoperate
fully with Pro Tools|HD & Pro Tools|HDX
• Ethernet and power supply
redundancy with auto switchover in
case of failure and locking connectors
• Provides the vital link to create an
extensive high-quality audio network
based on standard Cat 5e or Cat 6
wiring, bringing the latest advances
in digital audio networking to Pro
Tools|HD
• Cost-effectively increase audio I/O
quality and fl exibility with RedNet
interfaces
• Permits multiple workstations to
access the same interface hardware
and I/O
• No changes to Pro Tools workfl ow
required – simple, logical assignment
of RedNet I/O to Pro Tools|HD inputs
and outputs
• Up to 32 I/O with Pro Tools|HD over
single DigiLink connection per RedNet
HD32R
• Additional Avid/Digidesign interfaces
may be connected to expansion ports
• Upgrade to RedNet interfaces while
remaining fully compatible with TDM-
or AAX-DSP-based plugins and saved
sessions
Powered by
32-Channel Bridge between Dante Networks
and Pro Tools|HD
REDNET HD32R