Datasheet

ManualsBrandsFOCUSRITE PRO ManualsNetwork Audio + VideoRedNet D64R - 64-channel bridge between MADI and Dante Networks

Connectors (Rear panel)

2x etherCON locking Ethernet connectors – also compatible

with standard RJ45 connectors

2x BNC Word Clock In and Out

2x BNC MADI Coaxial In and Out

Duplex-SC MADI Optical connector In and Out

2x IEC power connector: 100–240Vac, 50/60 Hz, cord retaining

clips included

Controls (front panel)

Power on/off

Indicators (front panel)

Green LED power indicator

Network Status: Primary/Secondary/Locked

PSU: A/B

1 – Dual AC inlets with cable clips 2 – Dual locking etherCON Ethernet connectors

3 – Coaxial I/O to MADI system 4 – Optical I/O to MADI system 5 – Word Clock I/O

Up to 64 channels

D64R supports up to 64 channels of digital audio from a MADI system at standard (44.1/48kHz)

sample rates, 32 channels at 88.2/96 kHz, or 16 channels at 176.4/192.

Varispeed capability

D64R fully supports the MADI varispeed (56-channel) mode.

Add MADI to Dante – or Dante to MADI

D64R bridges a MADI system and a Dante network – and, like the rest of the Focusrite RedNet

range, it is fully interoperable with all other Dante network components. The bridging facility

means that you can use RedNet’s expanding range of high-quality audio interfaces to put

analogue or digital I/O, as well as third-party Dante-compatible products, exactly where you

need it – which is as close as the nearest Ethernet port. It also means that you can connect

Dante components to digital mixing consoles, interfaces and cards that use MADI.

Developed from the RedNet 6, Focusrite’s D64R is a second-generation bridging module

that can signiﬁ cantly expand the options and possibilities of both MADI and Dante networks.

Speciﬁ cations

D64R-DS • v1.1 • 20141001 • REƒ

www.focusrite.com/rednet

3 4 521

Sample rate: 44.1/48kHz, x2, x4, Pull

Clock Source: Internal, MADI, Word Clock

MADI Input: Coax, Optical, Auto

Clock Source: SRC, RedNet, MADI Input, Word Clock

Signal: In, Out, Varispeed

MADI Coaxial

Electrical standard: as per AES10:2008

Connector: BNC 75Ω

Recommended cable: 75Ω characteristic impedance

MADI Optical

Optical standard: as per AES10:2008 (ISO/IEC 9314-3, FDDI, ANSI

X3.166)

Recommended Cable: Multi-mode, Graded-index, 62.5µm core,

125µm cladding