Manual

13
PERFORMANCE AND SPECIFICATIONS
Line Level Outputs
All measurements taken at +24dBu reference level, maximum gain, R
L
= 100kΩ
0 dBFS Reference Level +18 or +24 dBu (switchable)
Frequency Response 20Hz – 20kHz ±0.5dB
THD + N <-100dB (0.001%) unweighted, 20Hz - 20kHz; -1dBFS input
Dynamic Range 120dB ‘A’-weighted (typical), 20Hz - 20kHz
Crosstalk
(Output to Output)
<-100dB unweighted, 20Hz - 20kHz; -20dBFS input
Headphone Output
All measurements taken at +19dBm reference level, maximum gain, R
L
= 600Ω
0 dBFS Reference Level +19dBm
Frequency Response 20Hz – 20kHz ±0.5dB
THD + N <-100dB (0.001%) unweighted, 20Hz - 20kHz; -1dBFS input
Dynamic Range 118dB ‘A’-weighted (typical), 20Hz - 20kHz
Output Impedance 5Ω
Headphone Impedance 32Ω – 600Ω
Crosstalk
(Output to Output)
<-90dB unweighted, 20Hz - 20kHz; -20dBFS input
Digital Performance
Supported sample rates 44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
Clock Sources Internal or from Dante Network Master
Connectivity
Front Panel
Headphone 1/4” stereo Jack socket
Rear Panel
Line Output
2 x XLR-3 male
PSU (PoE and DC)
1 x PoE (Network Port 1) Input and 1 x DC 12V Barrel Input Connector.
Network
2 x etherCON NE8FBH, also compatible with standard RJ45 connectors
(Accomodates rugged etherCON NE8MC*. Does not intermate with Cat 6 cable connector
NE8MC6-MO and NKE65* cable)