Tus neeg siv phau ntawv

-8--7-

Step 4: Place the Boundary Flags

The Boundary Flags are visual reminders for your pet to cognize

where the Boundary Zone is located. The Receiver Collar(s) will

activate within 1-2 feet of the Boundary Flags.

Please mark the spot you set up the boundary, it will be the

center of the boundary. You will need to TURN ON the collar at

the same spot to remain the boundary's fixedness. For example,

you turn on the collars 1 meter to the left side, the whole bound-

ary will be shifted 1 meter to the left.

IMPORTANT

1~6

Low Strong

1 0

ON OFF

1~10

Low Strong

Beep Modes: 0~1. With "1", beep mode ON, with "0" for beep OFF.

Virbration Modes: 0~6. With "0", the vibration mode off, and 1-6 modes

can be set as the corresponding intensity of vibration that pets can

receive.

Shock Modes: 0~10. With "0", the shock mode off, and 1-10 modes can

be set as the corresponding intensity of shock that pets can receive.

Step 3: Prepare Receiver Collar(s)

Install the contact Points and Collar Belt for Receiver Collar(s).

TURN ON the collar in

the same spot everytime .

Whole boundary will be shifted

if you DO NOT turn on the collar

in the same spot.

1 m