Tus neeg siv phau ntawv

-6--5-
1. Press the power key “ ” for 3 sec to turn on the device. The display
will first flickering “ ” , then takes 1-3 minutes wait until the display
numbers reaches to six or more. Now, it’s ready for next steps.
Step 2: Set Up Receiver Collar(s)
ON/OFF Mode Increase Reduce
The “ ” shows signal strength. Please use this system with 2 or
more Frames
“ ” or “ ” Poor GPS signal, this area is not suitable for GPS
wireless system.
“ ” : Fair GPS signal, this area is OK but not perfect.
“ ” or “ ” : Strong GPS signal, perfect area to set up GPS
wireless system.
TIPS
2. Long Press: Press the mode key “ ” for 3 sec to enter the distance
setting mode, and the flickering number on the screen means radius
range. (For example: "03"=30 meters radius range, "10"=100 meters.)
You can use the “ ” and “ ”keys to adjust the distance accordingly.
The system will automatically remember the setting after 5 sec. The "99"
will be the maximum, and the largest range will be 990 meters.
3. Short Press: Press the mode key “ ” for 1 sec to set the alarm mode
(beep, vibration and shock). Use the “ ” and “ ” key to adjust the
strength of the alarm. After selecting a pattern that works best for your
dog reasonably, we can step to train.
Up to 990M
in Radius
Press for
3 seconds