FS-2/2E STUDIO DTE DISK RECORDER RELEASE 2.
LEGAL NOTICES THIS DOCUMENT CONTAINS CONFIDENTIAL AND TRADE SECRET INFORMATION OF FOCUS ENHANCEMENTS AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE OR DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE, OR SELL ANYTHING THAT IT MAY DESCRIBE. REPRODUCING, DISCLOSING, OR USING IN WHOLE OR IN PART WITHOUT THE SPECIFIC WRITTEN AUTHORIZATION OF FOCUS ENHANCEMENTS IS STRICTLY FORBIDDEN.
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. CLEANING - Unplug this product from the wall outlet before cleaning. The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. ATTACHMENTS - Do not use attachments not recommended by the product manufacturer as they may cause hazards.
antenna discharge unit, size of grounding connectors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Refer to Fig. A. LIGHTNING - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
DISPOSAL - Dispose of electronics in an environmentally appropriate fashion. Do not throw in refuse destined for landfill. Manufacturer: Focus Enhancements 1370 Dell Avenue Campbell, CA 95008 Model Number: FS-2/2E Date of Manufacture: Reference the Serial Number label attached to the unit. WARRANTY - For customers within the USA and Canada, FOCUS ENHANCEMENTS, Inc.
Please mark the RMA number clearly on the outside of the package. Include a copy of your sales receipt, a brief description of the symptoms, your name, address within the USA or Canada, phone number and any special shipping instructions. Then deliver or ship the product, postage and shipping costs prepaid, to the address above. For customers outside the USA or Canada, A warranty can only be offered through your dealer or distributor and not through FOCUS ENHANCEMENTS directly, for this product.
TABLE OF CONTENTS CHAPTER 1 INTRODUCTION What is a DTE Disk Recorder? ....................................................................................................1-1 What is the FireStore FS-2/2E? ...................................................................................................1-1 Basic Applications .......................................................................................................................1-2 Receiving, Unpacking, and Inspecting ........................
TABLE OF CONTENTS SHIFT Key ......................................................................................................................2-3 Back Search Key ............................................................................................................2-4 Forward Search Key .......................................................................................................2-4 LCD Display ...............................................................................................
TABLE OF CONTENTS Record Format Menu ..........................................................................................................2-19 Setup Menu .........................................................................................................................2-19 Set Date & Time ...........................................................................................................2-19 OS Version # ......................................................................................
TABLE OF CONTENTS CHAPTER 4 REFERENCE Technical Specifications ..............................................................................................................4-1 Input/Outputs .........................................................................................................................4-1 Control ...................................................................................................................................4-2 Power ...............................................
INTRODUCTION CHAPTER 1 What is a DTE Disk Recorder? INTRODUCTION Thank you for purchasing the Focus Enhancements FireStore FS-2/2E DTE DV Studio Disk Recorder. The FS-2/2E is designed for use as a record or playback device in studios, mobile vans and other installations. The purpose of this User Guide is to explain the features and operation of the FireStore FS-2/2E. Study the contents of this User Guide before attempting to use your FS-2/2E.
INTRODUCTION dismounting of the drives without recabling or computer re-boots. Use the FS-2/2E's 10/100BaseT Ethernet port to share files over a network using FTP. The FS-2E, and the FS-2 (with the version 2.0 upgrade), also include IP control of the FS-2/2E. This means you can control the FS-2/2E using a standard web browser. Jump from clip to clip without spooling through tape when in playback mode. As well as video, record and playback embedded DV audio in 2-channel (16bit, 48kHz) format.
INTRODUCTION One (1) FireStore FS-2/2E unit with attached rack mounting ears One (1) 120GB IDE disk drive in caddy One (1) 6-pin to 6-pin FireWire cable (for External Drive connection) Mounting in a 19” Electronics Rack One (1) User Guide The FS-2/2E measures 15.89” high x 17.36” wide by 3.47” deep. It is an 2RU chassis featuring front rack mount ears to be installed into a standard 19” audio/visual rack. There must be room behind the unit for the attachment of cables.
INTRODUCTION Using External Disk Drives Lock Handle Drive Bay STEP 3: In addition to using a 3.5” IDE drive in the internal slot, you can also connect any FireWire disk drive to the HDD I/O port on the FS-2/2E. Power a single FireWire disk drive on the FS-2/2E at any given time. If you are using more than one external FireWire drive, you must provide external power to them. It may also be necessary to partition and format the drives before their use with the FS-2/2E.
INTRODUCTION Physical Features The FS-2/2E features two main surfaces, the front control panel and the rear connector panel. Front Control Panel The front control panel contains the seven control areas, as shown in the illustration below and described in this section: \ 5 1 2 1 3 4 6 7 Power Rocker Switch and Power LED This is the FS-2/2E's main power switch. This switch, although mechanical, is controlled using software.
INTRODUCTION Rear Connection Panel The FS-2/2E rear panel, shown below, contains control /audio/video input/output areas described in this section. You can select any of the available inputs as a source. When selected, that source is what is recorded to disk. If the unit is in E-E mode or recording, all outputs are live with the incoming signal. For any particular video input, there is an associated audio input selected as a default.
INTRODUCTION 12 Pb Input : For connecting the Pb signal from component input sources. Pb Output: For output of the Pb signal to component devices. 13 Pr Input: For connecting the Pr signal from component input sources. Pr Output: For output of the Pr signal to component devices 14 Sync Input: For connecting the Sync signal on non sync on green component sources. Sync Output: For connecting the Sync signal to non sync on green component devices.
INTRODUCTION Setting Up the FS-2/2E This section explains how to set up the FS-2/2E for use. Refer to the illustration below and perform the steps on the following page.
INTRODUCTION • To set up the FS-2/2E, do the following: When you select YES, a message indicating that the formatting is progressing appears. STEP 1: Plug in the power cord. STEP 2: Connect a Video input device. STEP 3: Connect an Audio source (if desired). STEP 4: Connect a Monitor if desired. STEP 5: Connect Speakers or Headset (to monitor the audio) if desired. STEP 6: Connect a Tape Drive if desired. STEP 7: Connect a Time Code Generator if desired.
INTRODUCTION STEP 4: Scroll from value to value using the FORWARD and BACK INDEX Buttons. STEP 5: Press and in the value. STEP 6: Press EXIT to return to the menu screen. to scroll through digits Regardless of the display, the file name always remains YYYYMMDDHHMMSS.xxx (Year-Month-DateHour-Minute-Second). Replacing the Power Module Fuse The power module of the FS-2/2E contains a protective fuse. To replace the fuse do the following: STEP 1: Turn off the FS-2/2E.
FS-2/2E FUNCTIONS CHAPTER 2 FS-2/2E FUNCTIONS This chapter contains the following sections: MARK OUT - Mark Out Key Use the MARK OUT key to mark a particular frame as an ending point when creating a clip for a playlist. NOTE: Once you have selected In and Out points, press the PLAYLIST key. (The In and Out key lights will turn off). You are then free to add more clips to the playlist by again selecting In and Out points. When finished, go to the PLAYLIST menu under SETUP.
FS-2/2E FUNCTIONS Utility Function Keys CMPST – Composite Video Source Input Key Press this key to select composite video as the input source. If there is no video source available when this button is pressed, the light flashes several times and then the FS-2/2E returns to the original video selection. This section explains utility function keys. OSD HDD LOCK REMOTE E-E OSD - (On Screen Display) Press this key to enable on screen display on the monitor output (composite).
FS-2/2E FUNCTIONS The default audio link is embedded 2-channel digital audio in the stream. You can also select either balanced analog audio or AES/EBU audio as the input link in the SETUP->AUDIO INPUT menu. other functions. If you press the MENU key at anytime, you will return to the marked MENU (except if you are in REC mode). LCD Menu Soft Keys Press this key to return to the beginning of the current clip if in playback mode. Press it twice to return to the previous clip during playback.
FS-2/2E FUNCTIONS the button is released. The SHIFT mode of particular keys is listed below that key or displayed on the FS-2/2E LCD. Back Search Key LCD Display The FS-2/2E LCD screen displays different FS-2/2E modes and states. On boot up, the FS-2/2E displays the following screen: Press the Back Search button to allow video to be played at different speeds (both slower and faster than real-time). Refer to the note under “Forward Search Key” for more information.
FS-2/2E FUNCTIONS Once ready for use, the FS-2/2E default Menu Screen appears as follows: 2 3 4 5 1 6 7 8 10 9 11 12 (4) Volume Number The volume or disk number of the current clip recording or playback session is displayed in the top right corner of the LCD display. For example, a display value of “2-014” identifies a track as being on volume 2. (5) Track or Clip Number The track number is displayed in the top right corner of the LCD Display.
FS-2/2E FUNCTIONS NOTE: The FS-2/2E will not accept NDF TC values in DF TC mode. AUDIOMETER - Displays left and right levels in db. The scale indicates -10db, -4db, and 0db. This display mode is only available for the FS-2E, or the FS2 (with the 2.0 upgrade).
FS-2/2E FUNCTIONS FS-2/2E Menus and Functions The FS-2/2E features a comprehensive menu system which allows a number of features to be initiated and setup.
FS-2/2E FUNCTIONS COMPOSITE, COMPONENT) AES/EBU) • • AUDIO IN LEVELS • TC MODE • • EXT TC (selections include SELECTED INPUT, VITC REFERENCE, VITC ANALOG, LTC, EMBEDDED DV, EMBEDDED SDI • REC RUN • REGEN • FREE RUN TC SET • TC PRESET • UB PRESET • TC DELAY (FS-2E only) • DROP/NON-DROP (submenus include DROP, NONDROP) • ON SCREEN DIS (sub-menus include ABS, TC, MENU, OFF) • FF/RW HI RES (sub-menus include ENABLE, DISABLE) • GPI PORT (sub-menus include DISABLE, PAUSE/UNPAUSE, INDEX/N
FS-2/2E FUNCTIONS To enter the FS-2/2E MAIN MENU, press the MENU key or soft key 1 (MENU) while in Stop mode. The following MENU SCREEN appears: Available items in the RECORD MENU are: NORMAL REC RETRO DISK RETRO CACHE RECORD MODE LOOP RECORD CONTROL MODE STILL PLAY MODE TIME LAPSE PLAY FROM EXIT SEL Menu Items The four line list indicates the currently highlighted menu item. Push soft key 3 (under the symbol) to see more selections. To scroll up through the menu, press SHIFT + soft key 3.
FS-2/2E FUNCTIONS Hold the button for more than 3 seconds to allow numbers to increase by 10 times. Press EXIT to return to the RECORD Press the REC key when in RETRO DISK mode to put the FS-2/2E into a RETRO DISK state (the FS2/2E's REC button flashes as if in PAUSE state). The FS-2/2E is actually recording in this state, but until you press the REC key a second time, the video records over itself in a continuous loop.
FS-2/2E FUNCTIONS Pressing the REC key when in RETRO CACHE mode puts the FS-2/2E into a RETRO CACHE state (the tally light on the FS-2/2E flashes as if in PAUSE state). The FS-2/2E is actually recording in this state, but until you press the RECORD key a second time, the video records over itself in a continuous loop. It is much the same as RETRO DISK recording, except that it utilizes a data buffer separate to the disk drive to cache video.
FS-2/2E FUNCTIONS Time Lapse Local You can select an interval of up to twenty-four hours. The interval is the period of time between the FS-2/2E capture of a single frame of video (a value of 00:00:00:00 means no frames will be recorded). Select these options to control the FS-2/2E from the front panel buttons only. You can also control the FS-2/2E with the optional wired remote control unit (ACSS-0019-01). This can be purchased at the Focus Enhancements online store: https:// www.focusinfo.
FS-2/2E FUNCTIONS captured to a single base file until STOP is triggered, or the nine minute file size limit is reached. The FS-2/2E has a menu item that allows the FS-2/2E to appear to external controllers as a Sony BVW-75 BetaSP VTR when in Remote RS422 mode. It also has a generic RS422 mode. Index at TC - In this mode, recordings are continuous until a break in the incoming timecode stream is detected. At that time, a new file is automatically created.
FS-2/2E FUNCTIONS Syncro Slave The FS-2E and the FS-2 (with the 2.0 upgrade), has two settings in Syncro Slave: NEW FILE - When using this setting (the default), and the FS-2E is triggered to stop recording from the camcorder, the current file is closed and a new file is opened ready for the next recording. SAME FILE - This option appends the new recording onto the same file. This significantly cuts down on the number of files created and is ideal for many applications.
FS-2/2E FUNCTIONS Play From Mode Menu This selection allows you to select the playback list used in play mode. There are three options available. TRACK LIST PLAY LIST When the FS-2/2E PLAY MENU is set to “TRACKLIST” the name of the current folder appears without brackets on the LCD display (for example, 2 SCENE 2). When the PLAY FROM menu is set to “FOLDERS”, the name of the current folder appears in brackets on the LCD display (for example, 2 ).
FS-2/2E FUNCTIONS Open Open allows you to open a playlist on disk. Do this as follows: STEP 1: In the PLAYLIST menu, select the OPEN option. A display similar to the following appears. If you have made modifications and wish to save them as a new playlist, modify the file name prior to saving it. SAVE PLAYLIST? 02-20-20 03-20-20 06-20-20 03-25-20 NEXT 03-30-20 Select NEXT and a display similar to the following appears.
FS-2/2E FUNCTIONS 0001 1-001 0002 1-004 0003 1-001 0004 1-003 EXIT The MOVE CLIP option allows you to move a clip within an existing playlist. To move a clip, use the following steps: NEXT STEP 2: NEXT Select the clip you wish to remove and then press NEXT. STEP 1: Select MOVE CLIP from the PLAYLIST -> EDIT menu. STEP 2: Once selected, scroll to the clip you wish to move.
FS-2/2E FUNCTIONS HDD Bypass 0001 1-001 0002 1-004 0003 1-001 0004 1-003 In this mode, the computer connects to the “HDD I/O” port on the FS-2/2E Rear Connector Panel. NEXT When you select HDD Bypass, the following displays on the FS-2/2E LCD: STEP 2: HDD Bypass mode allows the connected FireWire hard drives to be mounted or dismounted to a computer without removing them. Scroll to the desired clip, then select NEXT. The clip information is displayed.
FS-2/2E FUNCTIONS Record Format Menu Use The RECORD FORMAT menu allows selection of particular DTE Technology native NLE file formats prior to recording. All files are in the DV25 standard. to scroll through the selections. Press EXIT to return to the menu screen.
FS-2/2E FUNCTIONS Press SEL to open one of the following sub menus. This selection displays the current FS-2/2E Operating System (OS) Firmware version. SYSTEM DATE OS VERSION 02/24/02 3.0.m.032603 | & | MOVES CURSOR EXIT EXIT OS Upgrade SYSTEM TIME To upgrade operating system (OS) software, you must download a new .bin file to a FireWire drive on your computer. The latest version of FS-2/2E software can be downloaded from http:// www.focusinfo.com/support.
FS-2/2E FUNCTIONS appears: NTSC UPGRADE PAL SYSTEM FIRMWARE EXIT EXIT STEP 11: YES NO NOTE: Do not combine PAL and NTSC clips on a single drive. Select YES. You are warned with the following display: UPGRADE WILL OS!!! CONTINUE? STEP 12: YES NO Select YES to begin the OS upgrade. A message appears indicating the upgrade has begun. STEP 13: This submenu allows you to setup the FS-2/2E for remote operation using the RS422 control port.
FS-2/2E FUNCTIONS After you have set up RS422 to control the FS-2/2E using an external RS422 device, press the REMOTE button on the front panel or select REMOTE from the Control Mode menu. Audio Input In this submenu, you can change the default audio input linked to a particular video input. Audio In Levels This menu item allows you to set the audio input levels for FS-2/2E. Adjust the audio level between -34.5dB and +4.5dB in 1.5dB increments. 0.
FS-2/2E FUNCTIONS NOTE: If the FS-2/2E is set to EXT TC when in SYNCRO SLAVE mode, EXT TC stops once the tape in the camcorder ends. Focus Enhancements suggests that you use a different TC mode when using SYNCRO SLAVE. NOTE: TC Preset cannot be changed while in the EXT TC mode. NOTE: The FS-2E, or FS-2 (with the 2.0 upgrade), has the added ability to delay the recorded timecode relative to the content.
FS-2/2E FUNCTIONS Press EXIT to return to the menu screen. NOTE: You cannot set UB values after selecting EXT TC mode in the TC MODE menu. UB PRESET & When you select ABS, the absolute timecode value, or amount of time recorded to the disk, appears on the bottom center of the monitor output. When you select TC, the TC (Counter) timecode value appears on the bottom center of the monitor output. F:00:00:00:00 | This selection allows you to turn on or off the onscreen display on FS-2/2E's Monitor Output.
FS-2/2E FUNCTIONS file. Each sequential use of this function captures another frame to the same file until stopped. ENABLE DISABLE Backlight This selection enables or disables the FS-2/2E LCD backlight. EXIT BACKLIGHT ON GPI Port This menu allows you to change the setting of the GPI port. The highlighted function is the current setting after exit. OFF AUTO OFF EXIT Press EXIT to return to the menu screen. The highlighted state is saved after exit. Press EXIT to return to the menu screen.
FS-2/2E FUNCTIONS If you select CUSTOM, the FS-2/2E looks on disk drive volume 1 for any clip named “SPLASH.dv” and always displays the first frame of that clip. You can name any RawDV clip “Splash.dv” and the first frame from that clip appears as the default output in STOP mode. Preferences This menu allows you to save and restore system preferences. PREFERENCES Audio Correct SAVE This sub-menu allows you to change the AUDIO CORRECTION setting on the FS-2/2E.
FS-2/2E FUNCTIONS BETACAM, or MII output levels. Refer to Chapter 4 for more information. The selected mode becomes highlighted after you select Exit. If you select CUSTOM IP, a submenu opens to ask you to enter an IP number, Sub Net Mask, and Gateway. Network Setup IP ADDRESS 000.000.000.000 With NETWORK SETUP, you can connect the FS-2/2E to a network. When this is done, you can do FTP file transfers to or from the FS-2/2E or control the FS-2/2E using Telnet. The FS-2E, or FS-2, with the 2.
FS-2/2E FUNCTIONS Press the EXIT button to take you back to the SETUP menu. USER/PASSWORD This screen allows you to set a username and password for the FS-2/2E. If you are unsure what username and password to use, contact your system administrator. USER: FS2 PASWD: FOCUS In cases where DHCP is being used, by selecting VIEW IP INFO, you can see the IP address that the network has provided the FS-2/2E. IP 100.000 001.000 MSK 255.000 000.
FS-2/2E FUNCTIONS An example of the web interface is shown below. SC PHASE - Allows the subcarrier phase to be adjusted between +127 and -128. The default value is set at 0. Press and hold either or for more than 3 seconds to change the value by increments of ten. H PHASE - Allows the horizontal phase to be adjusted between +127 and -128. The default value is set at 0. Press and hold either or for more than 3 seconds to change the value by increments of ten.
FS-2/2E FUNCTIONS ORGANIZE OMF DELETE CLIP FORMAT PARTITION REPAIR FILE NAME FACTORY RESET DIAGNOSTIC Organize PINN Once you have finished a Pinnacle recording session, do the following: Organize Clip STEP 1: From the FireStore SETUP MENU, select ORGANIZE PINN. STEP 2: When prompted “ORGANIZE PINNACLE CLIPS? Select YES.
FS-2/2E FUNCTIONS Format Disk When you make this selection, the following screen appears: ORGANIZE AVID OMF CLIP? FORMAT DISK EXIT YES VOLUME 1? : EXIT YES NO For more information on using FS-2/2E clips in Avid, refer to “Using FireStore FS-2/2E Recorded Avid Clips on Avid Editing Systems” on page 3-4. Delete Clip NO Select between volumes by pressing the and buttons.
FS-2/2E FUNCTIONS When an unknown volume type (HDD) is connected to the FS-2/2E, the Partition process puts a FAT32 format onto the drive. It erases any previous partition and data. Select YES and a progress message appears on the screen. NOTE: You cannot add multiple partitions an a single drive using the FS-2/2E. With drives greater than 128G, the FS-2/2E creates multiple partitions. There will be a partition for each 128G of disk space available. Select between volumes by pressing the and buttons.
Using the FS-2/2E CHAPTER 3 How to Put Recorded Clips on a Computer System USING THE FS-2/2E Creating a Playlist How to Mark Scenes This chapter contains the following procedures: How to Make a Recording How to Playback Connecting the FS-2/2E to a Network To perform these procedures use input and output sources as illustrated in the following diagram.
Using the FS-2/2E How to Make a Recording Use the following procedure to make a recording using the FS-2/2E. STEP 1: Make sure the FS-2/2E is connected to power and has been turned on using the power switch on the rear of the chassis. STEP 2: Connect the required devices as explained in Chapter One. For this example, that would include a video source (audio and video), speakers or headset if desired, and a monitor if desired.
Using the FS-2/2E This section contains the following subsections: Mounting FireWire Disk Drives (Windows XP, 2000, 98SE and ME) Using FireStore FS-2/2E Recorded Avid OMF Clips on Avid Editing Systems Dismounting FireWire Disk Drives (Windows XP, 2000, 98SE and ME) Mounting FireWire (Macintosh) Dismounting (Macintosh) FireWire Disk Drives Disk Drives Mounting FireWire Disk Drives (Windows XP, 2000, 98SE and ME) STEP 1: On a Windows-based computer system, double click the My Computer icon on the top l
Using the FS-2/2E The second 2GB segment is labeled with a “-02”. Additional 2GB segments are labeled with a “-XX” number. With most NLE systems on a Windows computer, it is possible to utilize clips within the timeline by selecting the clips on the source volume (in this case, the connected FireWire disk drive) and importing them directly into the NLE’s bin. Clips can then be immediately used in the NLE’s timeline.
Using the FS-2/2E STEP 10: Drag the contents of the Media Tools Window into the bin. You can nos use these clips in the Avid timeline. Dismounting FireWire Disk Drives (Windows XP, 2000, 98SE and ME) Once you have completed working with your disk drive on a Windows XP, Windows 2000, Windows 98SE or Windows ME computer system, you must dismount the drive before unplugging it.
Using the FS-2/2E When mounted, your FireWire disk drive should appear on the computer's desktop as shown below: Dismounting FireWire Disk Drives (Macintosh) Once you have completed working with your disk drive on a Macintosh computer system, you must dismount the drive before unplugging it. Do this as follows: STEP 1: Select the disk drive on the computer's desktop. It is marked with a PC symbol. STEP 2: Drag the drive into the trash. This dismounts the particular disk drive.
Using the FS-2/2E How to Mark Scenes The FS-2/2E Scene Marking feature allows you to mark clips for placement in particular folders during recording, playback or stop mode. When a drive is formatted using FireStore, ten folders are created numbered 0 through 9.
Using the FS-2/2E Once complete, an additional file is added to the disk named “grade” and files are moved to the selected folder for easy access on an NLE system. Do not delete the file named “grade” from the disk if you intend to use the disk on FireStore again. Connecting the FS-2/2E to a Network You can connect the FS-2/2E to a network using the 10/100 Base T Ethernet port on the rear panel.
Reference CHAPTER 4 REFERENCE This chapter contains reference information for the FS-2/2E as follows: Differential Gain 2% maximum Hue Accuracy 1 Degree Signal/Noise Ratio Greater than 54 dB Bandwidth 5.
Reference Physical Specification Balanced Outputs THD@1 Khz Less than 0.05% 18.41lbs (8.36kg) Channel Separation 100 dBu @ 1 Khz 70 dB 19" x 17.3" x 3.
Reference FS-2/2E LCD Display Modes Supported RS422 Commands The table below shows LCD characteristics when used with different FS-2/2E control, record, play and stop modes: Shuttle FWD 21, 13, Shuttle Speed Shuttle Rev 21, 23, Shuttle Speed Jog FWD 21, 11, Jog Speed Jog Rev 21, 21, Jog Speed Stop 20, 00 Play 20, 01 Pause 21, 13, 0 Record 20, 02 Goto Timecode 24, 31, timecode PLAY/REC MODE FS-2/2E LCD Stop STOP Pause ll PLAY Play > PLAY Rec (Pause) ll REC Normal Rec (Rec) RE
Reference Custom Commands 48 80 82 0F 03 00 00 00 00 00 AVI - Record Format - CANOPUS The following commands are currently supported. 48 80 82 0F 04 00 00 00 00 00 AVI - Record Format - MATROX 48 80 82 0F 05 00 00 00 00 00 - Record Format - QUICKTIME Warnings!! No feedback occurs indicating that the command was processed successfully.
Reference 48 80 82 1D 05 00 00 00 00 00 - Audio Rec Level - -27.0 48 80 82 1F 00 00 00 00 00 00 48 80 82 1D 06 00 00 00 00 00 - Audio Rec Level - -25.5 48 80 82 1F 01 00 00 00 00 00 48 80 82 1D 07 00 00 00 00 00 - Audio Rec Level - -24.0 48 80 82 20 00 00 00 00 00 00 - Reference Video - Reference 48 80 82 1D 08 00 00 00 00 00 - Audio Rec Level - -22.5 48 80 82 20 01 00 00 00 00 00 - Reference Video - Free Run 48 80 82 1D 09 00 00 00 00 00 - Audio Rec Level - -21.
Reference FS-2 and FS-2E Studio DTE Disk Recorders User Guide 4-6 Part Number: MANL-0927-03
INDEX A absolute timecode value 2-5 AES/EBU input/output 1-7 air temperature 1-3 analog out 2-26 applications 1-2 audio correction 2-26 audio input levels 2-22 audiometer 2-6 AV/C 2-13 available space indicator 2-6 Avid DV OMF file format, editing 3-4 B back index key 2-3 back search key 2-4 backlight 2-25 balanced analog audio input/output 1-7 BVW-75 2-21 C component inputs/outputs 2-29 component video (Y, R-Y, B-Y) key 2-2 composite input/output 1-6 composite video source input key 2-2 control mode men
loop record 2-11 M MARK IN key 2-1 MARK OUT key 2-1 MENU 2-6 MENU key 2-3 menu system 2-7 mounting FireWire disks 3-3 N network connection 3-8 network setup 2-27 normal record 2-9 O on screen display 2-2 organize clip 2-30 organize OMF 2-30 organize Pinnacle 2-30 OS upgrade 2-20 OSD 2-2 P package contents 1-2 partition disk drives 2-31 password/username 2-28 Pb input/output 1-7 PINN 2-30 play all 2-14 play clip 2-14 play from mode menu 2-15 play key 2-3 play list 2-15 play mode menu 2-14 play/record sta
track list 2-15 transport control keys 1-5, 2-3 U Unpacking 1-2 updates, software 1-1 upgrade operating system 2-20 user bit 2-5 username/password 2-28 utilities menu 2-29 utility buttons 2-1 utility function keys 2-2 V video monitor output 1-6 video out adjustment menu 2-29 view IP information 2-28 volume number 2-5 Y Y/C input 1-6 Y/C output 1-6 FS-2 and FS-2E Studio DTE Disk Recorders User Guide I-3 Part Number: MANL-0927-03
FS-2 and FS-2E Studio DTE Disk Recorders User Guide I-4 Part Number: MANL-0927-03
