User's Manual

Edge 2 – User Manual MIXTILE
V1.1 Copyright © 2021 MIXTILE.
2 Connectors & Pin Assignments
The following section lists the interfaces connector pin assignments, pin types with corresponding
signal descriptions. The interface connectors on Edge 2 are listed in the table below.
2.1 Debug
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1 UART2_RXD IO Input UART2 serial data input for debug
2 UART2_TXD IO Output UART2 serial data output for debug
3 GND GND - Ground
2.2 UART
UART 3
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1 3.3V PWR Output 3.3V @ 100mA Max
2 UART3_RX IO Input UART3 serial data input
3 UART3_TX IO Output UART3 serial data output
4 GND GND - Ground
UART 5
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1 3.3V PWR Output 3.3V @ 100mA Max
2 UART5_RX IO Input UART5 serial data input
3 UART5_TX IO Output UART5 serial data output
4 GND GND - Ground
2.3 CAN-IO
Pin
#
Pin
Name
Pin
Type
Input/
Output
Signal Description
1 5V PWR Output 5V @ 200mA Max
2 CAN1_RX IO Input CAN receive data, connect to CAN transceiver
3 CAN1_TX IO Output CAN transmit data, connect to CAN transceiver
4 GND GND - Ground