User manual

9
DIMENSION
User manual
4.4. Remote control
Dimension is equipped with the CEC (Consumer Electronics Control) protocol. If your TV is equipped with this
function, enabling this function will allow you to control your soundbar with your TV’s remote control. The name used
for the CEC protocol may vary from one TV manufacturer to another.
Universal and learning remote controls can be programmed to control Dimension. If required, you can find the
infrared command codes on the Dimension soundbar webpage on Focal’s website: www.focal.com.
If your TV isn’t equipped with the CEC function, or if you don’t use a universal remote control, a remote control is
supplied with Dimension. The remote control uses the same layout as the touchscreen on the soundbar.
Before using the remote control, remove the plastic tab from the remote control’s battery compartment. To change
the batteries on your remote control, open the battery compartment and replace with an identical battery type:
CR2025.
Input selector
Standby/ON
Bass level setting
NIGHT mode
Turns on
display light
Volume control
Audio-Video Synchronisation
(Lip-sync)