User's Instructions

// 8.2 INSTALLATION – FLOATING

Floating installation

1) Remove the mounting bracket from rear of the appliance by moving the bracket down and

out from the appliance.

2) Find the optimal place to mount your appliance. Consider the proper position relative to

your room, placement of furniture and windows.

3) Hold the mounting bracket up to the wall to verify the correct location and ensure that the

mounting bracket is level. Use a pencil to mark the eight mounting holes on the wall at the

desired mounting location, using the mounting bracket as a template.

4) Drill a 0.3in diameter holes to at least 1.9in deep on the marked points.

NOTE: If installing the mounting bracket to a wall stud, there is no need to drill the holes in the wood and no need for the

plastic wall anchors. It is recommended to install the mounting bracket to at least one wooden stud.

5) Tap the 8x wall anchors into the pre--drilled holes with a hammer until they are ﬂush with

the wall.

6) Secure the mounting bracket to the wall by using all 8 wall-ﬁxing screws.

7) Carefully, install the appliance back onto the wall bracket.

8) With the appliance on the wall oﬀer the ﬂoating

shelf brackets to either sides of the appliance

lining up all 8x holes on the ﬂoating bracket with

the 8x holes on the side of the ﬁrebox. Then mark

with a pencil through the hole in the end of the

bracket against the wall.

9) Remove the appliance oﬀ of the wall.

10) Drill a 0.3in hole at least 1.9in deep on either

side of the appliance.

11) Tap the two wall anchors into the pre--drilled holes

with a hammer until they are ﬂush with the wall.

12) Install the appliance back onto the wall and screw

the ﬂoating shelf brackets on to the sides of

the appliance with the 8x loose ﬁrebox screws

provided.

13) Then screw the wall screws through the rear of

the ﬂoating shelf brackets and into the wall plugs.

14) Carefully slide the bottom of the surround onto

the ﬂoating shelf brackets.

15) Screw the two legs of the surround from the rear

onto the back of the top section of the surround

as shown, left

31.9in

41.9in

0.3in

1.9in

Before Installing the appliance onto the wall with the surround, secure the side trims each side of the

appliance as described in section 9.0 Preparing the Appliance.

The installation should be carried out by two adults to avoid injury or damage. If for any reason it is

considered too heavy, please obtain assistance.

// 11