User's Instructions

// 10.1 SLATE VIEW FUEL BED LAYOUT

Slate View

Evenly scatter the small crystals over the frosted

base as shown in image 1, left. The crystals should

be spread out across the whole base and form a layer

covering the whole area.

Take the two types of the slate eﬀect pieces and

spread these evenly throughout, on top of the bed

of crystals.

Place the logs on top of the base layer created by the

crystals and slate pieces. Position them as shown in

image 3. The logs can be placed in any order, we have

used the larger ones as centre pieces and placed the

remaining logs around them.

IMPORTANT – Place the logs carefully on the fuel bed ensuring you do not

make contact with the rear or side glass. Coming into contact with glass

may cause damage.

// 17