Operation Manual

33 | P a g e
10 FOBO Tire Plus Specifications
 Bluetooth: v4.0
 Supported profiles: GAP, GATT attributes, Device Information
Service, Proximity Reporter, Battery Service
 Transmit Conducted Power: +4.0dBm (sensor); -6.0dBm (In-Car)
 Receiver Sensitivity: -93dBm@0.1%BER
 Antenna Return Loss: -12dB
 Operating Frequency: 2.4 GHz
 Weight: ~11.5g (sensor – with battery) & ~44.6g (In-Car – without
batteries)
 Sensor Dimension H x D: 15mm x 26mm
 In-Car unit Dimension HxWxL: 25mm x 48mm x 85mm
 Maximum Pressure: 600kPa (87psi)
 Battery Type: CR2032 (sensor) & AA (In-Car). Operating life up to
two years. (NOTE: The battery operating life varies according to
usage and climate temperature)
 Operating Temperature: -40
o
C to 85
o
C(sensor); -20
o
C to 65
o
C (In-
Car)
 ESD: 8kV air, 4kV direct contact
 Operating Humidity: up to 90% non condensing at 40
o
C
 Dust and Water Proof: IEC60529 compliant to IP57(sensor)
 Mechanical & Environmental Reliability Testing Standards: IEC
60068-2-2, IEC 60068-2-1, ISO 21750, IEC 60068-2-29, IEC
60068-2-5, IEC 60068-2-32, ISO 15184, ISO 2409.
11 Warning
 Take note that FOBO Tire Plus is not meant to function as anti-accident
or anti-injury device. FOBO Tire Plus is not a substitute for safe tire
maintenance practices. Please take full responsibility of your own safety
while driving. And continue to send your car for regular tire check and
maintenance.
 Please take extra precaution to acoustics safety when operating the
FOBO Tire Plus In-Car unit. Note that placing the FOBO Tire Plus In-
Car unit beeper close to your ear may result in injury to the ear or
permanent loss of hearing.
 You shall not use the FOBO Tire Plus in any unlawful way that violates
any laws.
 Avoid exposing the FOBO Tire Plus In-Car unit and sensors to solvent,
fire or extreme temperatures.