Operation Manual

20 | P a g e
In case you do not hear a “Beep” after more than one minute, you may
remove the batteries from back of In-Car unit and re-insert the batteries to
reset the unit. Then select “Release In-Car unit” and repeat the procedure in
above paragraph.
5.7 Show/Hide Recommended Tire Pressure
You can choose to display or hide the Vehicle Recommended Pressure for
Front Tires (FRP) and Rear Tires (RRP) in the “Car Status” Page by selecting
„Show Pressure Setting‟ or „Hide Pressure Setting‟ from the car status screen
setting.
5.8 Clear Memory
The most recent tire pressure reading will be displayed in the “Car Status”
screen whenever the phone and FOBO Tire Plus are within Bluetooth range.
This pressure readings will be always be displayed as memory until the phone
receives the next pressure reading update from FOBO Tire Plus sensors/In-
Car Unit.
User can clear the memory of Tire Pressure readings by selecting Clear
Memory option in the car setting screen. All four tire boxes will be in the
“Car Status” Page will be cleared and display “--" until the phone receives
signal from FOBO Tire Plus sensors/In-Car Unit.
This function is normally used for trouble shooting purposes. FOBO Tire Plus
will always update the reading displayed on the App automatically with the
latest reading. You do not need to select „Clear Memory‟ to get the latest
reading.