Operation Manual

16 | P a g e
taken out from the battery compartment before, install it as though
it is a used set)
3) Open the FOBO Tire App.
4) Click on the “+” sign on the FOBO Tire App HOME screen to add a car
to your profile.
5) The text box for the In-Car unit ID will be automatically filled a unique
ID number.
6) Key in the name you would like to identify your car
7) Tap on the profile picture box and take a picture of your car.
8) Select the car manufacturer recommended tire pressure for the front and
rear tires. The information is usually available on a sticker at the door
jam (side of the driver‟s door) or in the owner‟s manual. For certain car
models, the information sticker may be on the trunk lid or on the fuel
door. You cannot proceed with the pairing without the input of this
information into the FOBO Tire App.
9) Click “Done” on the top right hand corner of the screen.
10) Next, you will be prompted to install the tire sensors starting from the
Front-Right tire.
11) Screw on the FOBO Tire Plus sensor to your Front-Right tire. Make
sure your smartphone touches the sensor to pair the tire sensor unit. If
you had screwed on the sensor before instructed by the App, remove the
sensor completely, wait for 8 seconds and then screw it back in again.
Repeat with the Rear-Right, Rear-Left and Front-Left tires as prompted
by the App.
12) You will be prompted that installation is completed and you are now
ready to use FOBO Tire Plus.
CAUTION:
Motor vehicles of all kinds (cars, trucks, motor scooters and motorcycles)
come with a very wide array of rims, wheels, and tires, with an even larger