Operation Manual

55 | P a g e
 FindME (Belonging profile and Loved One profile)
 User can activate this function for FOBO MAX both in range and out
of range from smart phone.
 When selected for a tag that is not in connection with the phone (i.e.
far away), a GPS location map will be displayed together with time
stamp. This screen shows when and where the tag was last
disconnected from the phone. There is a Next button to move to
FindME screen with signal level indicator.
 When selected for a tag that is in connection with the phone the
FindME screen with signal level indicator will immediately be
activated without displaying the GPS location map.
 The signal power level indicator will indicate the proximity of FOBO
Tag.
 When in close range, user can activate the two tone beep sound to
assist audibly in locating the FOBO MAX.
 FindME (Vehicle profile)
 User can activate this function for FOBO MAX both in range and out
of range from smart phone.
 When selected, the picture of the vehicle parking bay will be displayed.
There will be a Map button on the top hand right corner which will call
up, a GPS location map with time stamp. This screen shows when and
where the tag was last disconnected from the phone.
 The GPS location map is useful to locate outdoor parking where user
could be assisted by street names. However for indoor or underground
parking, this GPS location map will be of limited use. This is where
the picture of the vehicle parking bay will be useful. Please ensure to
take the picture of nearby pillars or walls with parking bay
identification mark eg. B2 F28 (basement two, row “F” bay twenty
eight). DO NOT take picture of the vehicle only which does not
provide information of the vehicle parking location.
 When selected for a tag that is in connection with the phone the picture
of the vehicle parking bay will immediately be activated without
showing the GPS location map.
 RemindME
 This is a default function for both Belonging profile and Loved One
profile.
 Refer to Belonging profile setting and Loved One profile setting to
understand use case.
 Turn on the “Silent Mode” switch if you do not want any alert sound
from this feature.