Operation Manual

9 | P a g e
prompt you to tap on the tire position that you want to replace for 5 seconds. The
box will then show “Disabled”. Then, select „Disable/Install Sensor‟ again and tap
on the same box and the App will prompt you to install the replacement sensor.
Follow the on-screen instruction and the replacement sensor will be paired and
ready to use.
NOTE: Battery life span up to Two years is an estimate based on normal use at
23 °C. Battery life may vary according to usage and climatic temperature.
Battery life span will change due to the following reasons:
1) Frequent change of pressure threshold setting in the App.
2) Disabling & enabling of sensors.
3) Release & pairing.
4) Removal & screw-on of sensors.
5) Operating under extreme cold/hot temperature.
6) Testing of product.
7) Rotation (refer section 5.4 of this user manual)
8) Trigger alert or let activated alerts unattended.
9) Multiple removal and screw-on of sensors for equalizing all tire pressures.
All these activities will drain a battery very fast and affect the battery life span.