Operation Manual

31 | P a g e
Sensor structural threshold: 350N ball pressure intensity test
Mechanical & Environmental Reliability Testing Standards:
IEC 60068-2-2, IEC 60068-2-1, ISO 21750, IEC 60068-2-29, IEC 60068-
2-5, IEC 60068-2-32, ISO 15184, ISO 2409
10 Warning
Take note that FOBO Bike is not meant to function as anti-accident or anti-
injury device. FOBO Bike is not a substitute for safe tire maintenance
practices. Please take full responsibility of your own safety while riding. And
continue to send your bike for regular tire check and maintenance.
You shall not use the FOBO Bike in any unlawful way that violates any laws.
Avoid exposing the FOBO Bike sensors to solvent, fire or extreme
temperatures.
FOBO Bike may fail to function properly if the battery is below optimum
level. Replace the battery immediately to continue enjoying full features of
FOBO Bike.
CAUTION
THERE MAY BE A RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE. DISPOSE ALL USED BATTERIES
PROPERLY.
11 Regulatory Information
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy