Operation Manual

30 | P a g e
o You should be directed to web page that clearly displayed FOBO
account is activated”.
Unable to Login after signing up to FOBO App
o Make sure your e-mail address is typed correctly
o A verification mail will be sent to your e-mail address
o Follow the instruction in the mail to activate your account before you can
Login
o Check if internet connection is available on your smartphone
Unable to pair FOBO Bike sensors
o Make sure the sensor is screwed onto a tire valve with pressure above
100kPa
o Try unscrew the sensor from tire valve, screw it back and try again
o Make sure the battery is installed correctly with battery “+” on top.
o Make sure your smartphone has Bluetooth 4.0 (Smart Ready) capability.
NOTE: BLUETOOTH 2.0 OR 3.0 WILL NOT WORK WITH THIS
DEVICE.
o Try to reset the Bluetooth manager of your smartphone (for iOS: Settings-
> Bluetooth-> OFF->ON). At times the Bluetooth manager may be
disrupted which may require manual reset.
o Try to do a hard reset on the phone.
9 FOBO Bike Specifications
Bluetooth: v4.0
Supported profiles: GAP, GATT attributes, Device Information Service,
Proximity Reporter, Battery Service
Transmit Conducted Power: +4.0dBm (sensor)
Receiver Sensitivity: -93dBm@0.1%BER
Antenna Return Loss: -12dB
Operating Frequency: 2.4 GHz
Weight: ~11.5g (sensor with battery)
Sensor Dimension H x D: 15mm x 26mm
Maximum Pressure: 600kPa (87psi)
Battery Type: CR2032 (sensor) Operating life up to two years. (NOTE:
The battery operating life varies according to usage and climate
temperature)
Operating Temperature: -40
o
C to 85
o
C(sensor)
ESD: 8kV air, 4kV direct contact
Operating Humidity: up to 90% non condensing at 40
o
C
Dust and Water Proof: IEC60529 compliant to IP57(sensor)