Operation Manual

23 | P a g e
This feature will enhance sensor signal reception. It is useful if the Bike is pulling a
trailer with installed FOBO Bike sensors or the user is facing a problem in receiving
signals from the sensors due to interference.
For power consumption, use of FOBO Signal + may reduce the battery life by 25%
to 30%. If your sensor range and signal is fine, then you don't need to use this feature.
5.14 Tire Inflation/Deflation
To Inflate/Deflate the tire user just need to unscrew the sensor, inflate/deflate the
tire then screw back the sensor on tire valve. User does not need to release or
disable the sensor.
5.15 Reference pressure at 20 deg C:
Reference pressure is a temperature-compensated tire pressure referenced back to a
standard temperature of 20 degree Celsius. This is useful and serves as a guide for
the user to decide on the approximate amount of air needed to inflate the tire during
hot season or immediately after a long drive.
The reference pressure reading is located above/below the actual pressure reading in
blue with smaller font size. The user has an option to show / hide the reference
pressure reading for individual profile by going to the “settings” at top right corner.