Operation Manual

19 | P a g e
5.7 Transfer FOBO Bike to another user
Before passing on your FOBO Bike set to another user, you will have to release the
FOBO Bike sensors from your FOBO account. Follow the instructions at Section
5.6 above to release your FOBO Bike sensors.
5.8 Changing Recommended Tire Pressure
CAUTION:
Do not change setting when away from your bike. Once you have confirmed a
changed of settings on your FOBO Bike App, you will be prompted to sync the
new settings with the sensors by the following the FOBO Bike App’s pop-up
instructions.
To change your bike tire pressure setting:-
1. Select the Bike profile that you wish to change its settings.
2. At the Bike status screen, click the settings icon at the top left of the screen to
call up the Setting Menu.
3. Then select “Edit Bike Profile”.
4. At the bottom of the ensuing screen, the current pressure settings of tires are
shown. Tap at the tire that you would like to change its setting and 3 scroll
wheels will Appear for:-
Min – Minimum Pressure threshold.
Recommended – Bike manufacturer recommended tire pressure.
Max – Maximum Pressure threshold.
5. You will only need to scroll the middle wheel labeled „Recommended‟.
6. Scroll the recommended pressure to the value that you wish to set. The other
„Min‟ and „Max‟ scroll wheels will automatically change based on the
„Recommended‟ pressure that you have set. The „Min‟ value is automatically set
8% below the „Recommended‟ pressure and the „Max‟ value is automatically set
25% above the „Recommended‟ pressure.
7. If you wish to customize the „Min‟ and „Max‟ values, you can scroll them
independently. The App limits the customization of „Min‟ and „Max‟ values to
15% below(or 30kPa whichever is higher) and 35% above(or 600kPa whichever
is lower) the „Recommended‟ pressure, respectively.