Operation Manual

17 | P a g e
1. Ensure that the user to be shared (recipient) has downloaded the FOBO Bike
App and has activated their App with their own email address.
2. Ensure that the recipient‟s smartphone has the Bluetooth connection turned on.
3. On your bike status screen, click on the settings icon and select „FoboShare‟.
4. Click on the “+” sign at the top right corner of the App.
5. Type in the recipient‟s email address that was used to activate the App.
6. Your bike profile will appear on the recipient‟s App with a “FoboShare” logo.
7. The recipient clicks on your bike profile and will start to receive all the data
from your FOBO Bike sensors on his/her smartphone when he/she is within
Bluetooth range.
NOTE: Please ensure good internet connection for FOBO Bike App to connect to
the cloud.
Note that shared users will not be able to change settings (name, user limits, etc) on
your FOBO Bike profile using their phones. They can only view the readings and
receive alerts. At the FOBO Bike‟s App HOME page, a shared bike will depict a
“FoboShare” logo at the bottom of bike profile image to distinguish a shared bike
from your own bike.
5.4 Tire rotation
This feature is useful when you have sensors that mixed up and you are not certain
which sensor goes to which tire position. It is used to set the sensor to their new
positions.
You do not need to physically remove the sensors. To correct the position of the
sensors in the FOBO Bike App, please select Tire Rotation in bike status screen.
You will be prompted by the App to:
1) Move to the tire position instructed by the App.
2) Place your phone touching the sensor and hold it there for 15 seconds.
3) Repeat step 1 & 2 for remaining tire position as instructed by the App.
You are now ready to use FOBO Bike with the new tire positions. You can perform
tire rotation as often as you want.
5.5 Disable sensor and Replace new sensor
You may want to disable a sensor in the App due to a physically missing sensor or
damaged sensor and to install a replacement sensor. Disabling the missing or
damaged sensor in the App will stop the alert for missing sensor alerts.