Operation Manual

15 | P a g e
3) Click on the “+” sign on the FOBO Bike App HOME screen to add a bike to
your profile.
4) Choose a bike profile and click “Confirm”. You have11 options of bike
profile to choose, such as below:-
5) Follow the instruction on the screen.
6) Key in the name you would like to identify your bike.
7) Tap on the profile picture box and take a picture of your bike.
8) Select the bike manufacturer recommended tire pressure for the front and rear
tires.
Refer to the bike owner‟s manual for the recommended tire pressure. You
cannot proceed with the pairing without the input of this information into the
FOBO Bike App.
9) Click “Done” on the top right hand corner of the screen.
10) Next, you will be prompted to install the tire sensors. Follow the instruction
on the screen. Screw the FOBO Bike tire sensor on to tire valves only when
you are prompted. Make sure your smart phone is nearby or touching the
sensor to detect signal from the sensor unit. If you had screwed in the sensor
before instructed by the App, remove the sensor completely and screw it back
in again. Repeat with subsequent sensor, starting from the Front-Right tire.