Operation Manual

14 | P a g e
By submitting your information to sign up a new user account, you
acknowledge your acceptance to the terms and conditions of our Software
Licensing Agreement and Privacy Policy.
5.2 Installing FOBO Bike sensors
NOTE:
Do not install the sensors to the bike tire valves until prompted by the FOBO
Bike App’s on screen instruction.
To minimize the risk of potential electrostatic discharge(ESD) attack, please
hold the tire rim when screwing the sensors on to the tire valves. ESD may
cause damage to the sensor or impair its function.
Installing FOBO Bike sets on more than one bike which are closely parked may
cause cross interference to the Bluetooth signals. Please install FOBO Bike on
one bike at a time.
WARNING!
Please ensure sufficient clearance between installed FOBO Bike sensor and any
part of the bike. There is a risk of damage to the sensor or ripping off valve
from the rim or sudden air leak if clearance is insufficient; the valve may
deflect under strenuous vibration.
Ensure sensor clearance with vehicle parts is 10mm(1/2”) and 5mm(1/4”) for
installation on a rubber valve and a metal valve, respectively.
RUBBER VALVE: If you use a rubber valve, do ensure that the rubber valve has
not degraded; there is a risk of failure if the sensor is installed on a degraded
valve due to deflection under strenuous vibration. We strongly recommend the
replacement of the rubber valve at regular intervals or with tire replacement to
reduce the chance of failure.
To begin using FOBO Bike, firstly ensure that the FOBO Bike App is downloaded
and you have already login to the App (see section 5.1 above for installation and
login).
Follow the steps below to pair FOBO Bike to your smartphone:-
1) Turn on your smartphone‟s Bluetooth connection.
2) Open the FOBO Bike App.