Users Manual

EN
1. Please use a 5V2A/9V2A/12V1.5A
adapter to charge the product. (Type C
cable is included, adapter is not
included).
2. Using a 5V/2A adapter, it will take
approximately 5-6 hours to fully charge
the unit. In order to extend the battery
life it is recommended to fully charge
the unit every 3-6 months.
Short press the power switch to boot the jump starter, the display will be
turned on. For energy saving, the jump starter will be turned to standby
mode if there is no operation within 20 seconds.
Turn on the jump starter. Press the power button continuously for 3
seconds to turn on / off the flashlight mode.There are four modes
including illumination, SOS and Strobe, warning light. Short press the
power switch button to change the 3modes(illumination, SOS and
Strobe)or turn off the flashlight mode. Double press the power switch
button to enter the warning light mode or turn off the warning light
mode.
This portable jump starter is also equipped with two smart USB outputs
(USB1-QC3.0:5V 3A/9V 2A/12V 1.5A;
USB2-5V 2.4A) that provide
the fastest charging speed for your portable electronic devices, such
as phones,tablets, bluetooth earphones, etc