Users Manual Part 2

Handling the camera

5.5 Performing a factory reset

If you have forgotten the camera password, you need to perform a factory reset. A reset

can also be performed if the camera is not working as expected, for example due to per-

sistent connection problems. After the factory reset, you need to set up the connection

again between your camera and your mobile device.

Follow this procedure:

1. Turn off the FLIR ONE Edge camera.

2. Make sure the USB cable is disconnected.

3. Press and hold the On/Off button until the LEDs, after about 12 seconds, show a

steady light.

4. The camera will now restart after the factory reset.

#T810603; r. AB/87499/87499; en-US