User's Guide

Settings
27
Options Description
Motion Detection Sensitivity
Select from Lowest/Low/Mid/High/ Highest for the motion detection mode
sensitivity.
Record Timer
Select from Disabled/3hrs/6hrs/12hrs/24hrs/48hrs/72hrs for the record time.
Battery Protection
Select from Enabled/Disabled for the battery protection.
Battery cutoff voltage
Select from 12V (11.6-12.3)/24V (23.2-24.6) for the battery cutoff voltage.
Wintertime Battery Protection
Select the month(s) to apply the battery protection feature.
• To use parking mode, you must install the hardwiring cable. If continuous power is not supplied to the
product, the product will stop recording when the vehicle engine is turned off.
• The vehicle battery will not be charged while the vehicle is parked. If you record in parking mode for an
extended period, the vehicle’s battery may be depleted and you may not be able to start the vehicle.
• For more information about parking mode, refer to "3.5 Using parking mode" on page 17.
• The battery cutoff voltage can be set only when the Battery Protection setting is set to Enabled.
• If the off voltage value is too low, the product may consume the battery completely depending on the
conditions like the vehicle type or temperature.
6.4 Setting road safety features
From the mobile viewer, tap Dash Cam settings
>
Road Safety Settings to manage the road safety features
settings.
Options Description
Safety Cameras
Select from Enabled/Disabled for the safety cameras.
Mobile Zone Alert
Select from Enabled/Disabled for the mobile zone alert.
Vehicle Type
Select the vehicle type from Sedan/SUV/Truck (Bus).
Initialize ADAS
In Initialize ADAS, tap Initialize
>
OK to proceed with initializing.
LDWS
(Lane Departure Warning)
Select from
Disabled/Low/Mid/High for the LDWS sensitivity.
LDWS Speed
Select from 50km/h / 60km/h / 80km/h / 100km/h for the LDWS detection speed.
FCWS
(Forward Collision Warning)
Select from
Disabled/Low/Mid/High for the sensitivity.
Low Speed FCWS
Select from Disabled/Low/Mid/High for the sensitivity.
FVDW (Front Vehicle Departure
Warning)
Select from Enabled/Disabled for the FVDW feature.