User's Guide

26
6. Settings
You can set the product features according to your needs and preferences using the mobile viewer or the
PC viewer. The following procedures are based on the mobile viewer.
The product will stop recording while configuring settings on the mobile viewer.
6.1 Managing the memory card
From the mobile viewer, tap Dash Cam settings
>
Memory Card Settings to manage the memory card settings.
Options Description
Memory Partition
Select from Continuous Priority/Incident Priority/Parking Priority/Manual Priority/
Driving Recording Only for the memory partition type.
Formatting Memory Card
In Formatting Memory Card, tap Format
>
OK to proceed with formatting the
memory card.
Overwrite Videos
Select the desired modes to allow video overwriting.
6.2 Setting the Camera
From the mobile viewer, tap Dash Cam settings
>
Camera Settings to adjust the camera settings.
Options Description
Brightness-front
Select from Dark/Mid/Bright for the brightness of the front camera.
Brightness-rear
Select from Dark/Mid/Bright for the brightness of the rear camera.
6.3 Setting recording features
From the mobile viewer, tap Dash Cam settings
>
Record Settings to manage the recording features settings.
Options Description
Continuous Mode Incident
Recording Sensitivity
Select from Disabled/Lowest/Low/Mid/High for the sensitivity.
Super Night Vision 2.0
Select from Disabled/Continuous Mode/Parking Mode/Continuous+Parking for the
Super Night Vision 2.0 mode.
Parking Mode
Select from Disabled/Motion Detection/Time Lapse/Energy Saving for the parking
mode.
Impact Sensitivity in Parking
Mode
Select from Lowest/Low/Mid/High/Highest for the parking mode sensitivity.