Owner's Manual

Using recording features
22
3.6 Using the Super Night Vision 2.0
With the Super Night Vision 2.0 feature, you can record videos that are much brighter than videos recorded
without this feature. This feature is enabled by real-time image signal processing (ISP) to improve the
brightness of recorded videos, both while driving and parking at night.
1
From the mobile viewer, tap Dash Cam Settings
>
Record Settings.
2
From Super Night Vision 2.0, select the desired recording mode to use the Super Night Vision 2.0
feature. The new setting is applied automatically.
3.7 Using the road safety features
The road safety features include a safety camera alert system, a lane departure warning system (LDWS),
a forward-collision warning system (FCWS), a low speed Forward collision warning system (low-speed
FCWS), blind-sport collision warning system (BCWS) and a front vehicle departure warning (FVDW).
Safety feature Description
LDWS
(Lane Departure Warning)
Detects the lane departure via the real-time video image and warns the driver
.
FCWS
(Forward Collision Warning)
Detects forward collision danger via the real-time video image and warns the driver
when the vehicle drives at 30 km/h or above.
Low Speed FCWS
Detects forward collision danger via the real-time video image and warns the driver
when the vehicle drives at 30 km/h or lower.
BCWS
(Back Corner Warning)
Detects rear and corner collision danger via real-time video and warns the driver
.
BCWS videos are saved as “BC” after the file name, and stored in the
"evt_rec" folder.
FVDW (Front Vehicle
Departure Warning)
Detects the departure of the vehicle in front and notify the driver.
Road safety features are performed differently depending on the set speed and sensitivity of the features.
To use and manage the road safety features, tap Dash Cam settings
>
Record Settings on the mobile viewer. For
moreinformationaboutroadsafetyfeaturessettings,referto"6.4Settingroadsafetyfeatures"onpage31.