Owner's Manual
Table Of Contents
- Operating Instructions
- 1. Product overview
- 2. Installing the product
- 3. Using recording features
- 4. Using the mobile viewer
- 5. Using the PC viewer
- 6. Settings
- 7. Accessing the product information
- 8. Upgrading the firmware
- 9. Troubleshooting
- 10. Specifications
Product overview
10
1.2 Part names
1.2.1 Front camera (main unit) - front view
Format button
Press and hold to format the
memory card.
Reset button
Insert the tip of a sharp
object to reset the product
when an error occurs.
Microphone
Used for voice recording.
Speaker
Outputs the voice guide and
buzzer sounds to indicate
the product’
s status.
Voice recording button
Press to enable or disable
voice recording.
Power button
Press and hold to
turn off the product.
Press to turn on the product.
Wi-Fi LED
Indicates the Wi-Fi
connection status.
GPS LED
Indicates the GPS
connection status.
• To reset the product, press and hold the voice recording ( ) and manual recording (REC) buttons
simultaneously until you hear beeps.
• Refer to the following table to check the status of the product using the LED indicators.
LED LED STATUS Operation description
Security LED
(light on)
The product is turned on.
Wi-Fi LED
(light on)
In AP mode (Wi-fi connected).
(flickers)
In AP mode (Wi-fi disconnected).
GPS LED
(light on)
GPS has been connected.
Off
GPS has been disconnected.