User Manual

FN-LINK TECHNOLOGY LIMITED
http://www.fn-link.com
Page6/13
Operating Channel WiFi 2.4GHz:
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
14: (Ch. 1-14) – Japan
BT 2.4GHz: Ch. 0 ~78
Media Access Control WiFi: CSMA/CA with ACK
BT: AFH, Time Division
Antenna External Antenna
Antenna Gain 3.9dBi Max
Network Architecture WiFi: Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
Software AP
WiFi Direct
BT: Pico Net, Scatter Net
Security WiFi: WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE
802.11x, IEEE 802.11i
BT: Simple Paring
OS Supported Android /Linux/ Win CE /iOS /XP/WIN7
Host Interface WiFi: SDIO
BT: UART
Operating Voltage 3.3±10% Vdc I/O supply voltage
Dimension Typical L12.0*W12.0*H1.6mm
2.2 Power Consumption
Power Consumption
(Typical by using
SWR)
WiFi only:
TX Mode: (Throughput mode) 170mA (MCS7/BW40/13dBm)
RX Mode: (Throughput mode) 130mA (MCS7/BW40/-60dBm)
Associated Idle power saving with DTIM=3 2.1mA
Unassociated Idle: 0.1mA
RF disable Mode: 0.1mA
BT: Inquiry & Page Scan: 0.9 mA
ACL no traffic: 7.5mA
SCO HV3: 15.0mA
3. Mechanical Specification
3.1 Outline Drawing (Unit: ±0.15mm)