Owner’s Manual 2007

37
6.2. Cleaning and lubrication after firing
u Disassemble the pistol as shown in Section 5.1.
v Using the cleaning brush or a spray, apply solvent inside the
barrel and let the product work for a few minutes.
w Using a cleaning rod and patches, working them back and
forth, remove the functional lubricant from the inside of the
barrel, until the patches come out clean.
Be careful not to scratch or damage the muzzle as this can affect
accuracy. It is recommended to clean the barrel from the chamber end.
x When the barrel is clean, again use a cleaning rod and patch,
this time moistened with storage lubricant, to protect the inside
of the barrel until the next use.
Please note that the inside of the barrel should be wiped dry before
shooting (Section 6.1).
y Using a cleaning brush and solvent, remove any carbon or
other deposits from the areas of the pistol attracting powder
and primer residues, such as the slide, the chamber and
the extractor.
z Using a soft cloth or a rag, and solvent if necessary, remove
any dirt from the magazine housing of the frame.
{ Thoroughly clean all of the parts of the pistol in order to
remove the functional lubricant and dirt.