Owner’s Manual 2007

x Remove the

follower spring

together with the

magazine follower

and the magazine

bottom catch.

This level of disassembly is sufﬁcient to perform thorough cleaning.

Further disassembly should only be carried out by an authorized armorer

or by an FN HERSTAL Recommended Service Center.

To reassemble the magazine, follow the steps listed in Section

5.2. in reverse order, taking into account the following points:

4 Ensure that all the components of the magazine are

perfectly clean.

4 Ensure that the magazine follower and the magazine bottom

catch ﬁt correctly onto the follower spring and that the

assembly is oriented correctly.

4 The magazine bottom plate can only be slid back into position

when the magazine bottom catch is pushed far enough into the

magazine body.

4 Ensure that the magazine bottom plate correctly locks

into position.

Magazine Bottom Catch Follower Spring Magazine Follower

Magazine Bottom Plate

Magazine Body