Owner’s Manual 2007

33
5.2. Disassembling the magazine
Disassembling the magazine takes only a few seconds and should be a part of
the pistol’s normal maintenance.
u If not already done, press the magazine release in order to
eject the magazine from the pistol and unload it completely
(refer to Section 4.8.).
v Using a tool such as a screwdriver, press on the protruding part
of the magazine bottom catch through the hole in the magazine
bottom plate.
Hold the catch in that position and then slide the magazine bottom plate
halfway forwards.
w While holding the magazine bottom catch (which is subjected
to the force of the follower spring) in position, slide the
magazine bottom plate off the magazine body and then
carefully release the pressure on the follower spring.
Magazine
Bottom Plate
Magazine
Bottom Catch