Owner’s Manual 2007

28
4.7. Reloading during firing
After firing the last cartridge, the slide remains in the open position.
The empty magazine can then quickly be replaced by a loaded one
as follows:
u Press on the magazine release to eject the empty magazine.
v Insert a loaded magazine into the handgrip until it locks
onto position.
w Release the slide by
pushing downward
on the slide stop and
then let the slide return
under spring force,
causing the first cartridge
to be chambered.
During this operation,
be careful not to touch
the trigger.
Please note that the hammer is still in the cocked position. The pistol will be
ready to fire in single-action mode.
It is also possible to disengage the slide stop by pulling the slide fully
rearward and then releasing it.
x Continue firing.
Slide Stop