Owner’s Manual 2007

28 29
4.8. Unloading the pistol
u If the hammer is cocked, decock it as described in Section 4.5.
v Press the magazine release in order to eject the magazine.
Ifthemagazinedoesnotpopout,pullonitsbottomplate.
w Pull the slide fully rearward in order to eject the remaining
cartridge from the chamber and then release the slide.
If the slide is already automatically locked into the rearward position after
having fired the last cartridge, this step should be skipped.
Do not forget to pick-up, clean and store the ejected cartridge.
x Pull the slide fully rearward, lock it into its rear position by
using the slide stop, and then ensure via the ejection port that
the chamber is completely empty.
y Release the slide by pushing downward on the slide stop, and
then let the slide move forwards under control.
z Decock the hammer as described in Section 4.5.
{ Unload the magazine by removing the cartridges one by one.
Slightly push down on the rear part of the top cartridge and then carefully
pushitouttoreleaseitfromthelipsofthemagazine.
Repeatthisprocedureuntilthemagazineiscompletelyempty.
Unloadthesparemagazines.
| Insert the empty magazine back into the pistol.
If the pistol will be stored in its storage box, do not insert the empty
magazine.Thepistolandthemagazinearestoredseparatelyinthebox.
4.7. Reloading during firing
After firing the last cartridge, the slide remains in the open position.
The empty magazine can then quickly be replaced by a loaded one
as follows:
u Press on the magazine release to eject the empty magazine.
v Insert a loaded magazine into the handgrip until it locks
onto position.
w Release the slide by
pushing downward
on the slide stop and
then let the slide return
under spring force,
causing the first cartridge
to be chambered.
During this operation,
be careful not to touch
the trigger.
Please note that the hammer is still in the cocked position. The pistol will be
ready to fire in single-action mode.
It is also possible to disengage the slide stop by pulling the slide fully
rearward and then releasing it.
x Continue firing.
Slide Stop