Owner’s Manual 2011

12 13
25 WE RESERVE THE RIGHT TO REFUSE SERVICE ON
FIREARMS THAT HAVE BEEN ALTERED, ADDED TO OR
SUBSTANTIALLY CHANGED.
Removal of metal from the barrel or modifications of the firing
mechanism and/or operating parts may lead to a refusal of service on
such firearms. We will charge the owner for parts and labor to return
the firearm to original FNH USA specifications.
DO NOT, UNDER ANY CIRCUMSTANCES, ALTER THE
TRIGGER, SAFETY OR OTHER PARTS OF THE FIRING
MECHANISM OF THIS OR ANY OTHER FIREARM.
FAILURE TO OBEY THIS WARNING MAY RESULT IN
INJURY OR DEATH TO YOURSELF OR OTHERS.
B e c a r e f u l !
5. NOMENCLATURE
In conventional gun terminology, the position and movement of parts are
described as they occur with the firearm horizontal and in the normal firing
position: the muzzle is forward or front, the pistol grip is rearward or rear,
the trigger is downward or underneath, the sights are upward or on top.
For general parts nomenclature refer to Figure 1 above, and Figures 2
and 3 on page 14.
6. DESCRIPTION AND OPERATION
The SC 1 is an over and under shotgun made to fire two successive shots by
pulling the trigger twice, once for each shot. After the first shot, recoil sets
the trigger to fire the second barrel. The “safety”/selector allows you to
choose which barrel fires first (usually the bottom barrel). The action is
opened with a lever mounted on the top of the receiver just forward of the
“safety”/selector. When the action is opened after firing the hammers are
cocked automatically and empty shells (one or two) are ejected clear of the
chamber(s) automatically. Unfired shells are elevated in the chambers for
Fiber-Optic
Front Sight
“Safety”/Selector Switch
Top Lever
Trigger
Forearm
Release Lever
Extended
Choke Tubes
Side Rib
Receiver
FIGURE 1
Barrels
Barrel
Ports
Mid Bead
Forearm
Top Rib
Trigger Guard
Recoil Pad
Adjustable Comb
Buttstock