Owner’s Manual 2016

31
• Slightly lubricate the moving parts group with
maintenance lubricant at the points indicated in § 6.1.
Hammer group
• Clean with a soft, dry
cloth. If necessary, use
water.
Magazine
• Clean with a soft, dry cloth.
If the magazine is very soiled, disassemble it and then clean its
parts by using water.
Please note that a (reduced capacity) 10-round magazine
cannot be disassembled.
❖
Reassemble the carbine.
Never use any kind of solvent on the magazine.
Components of the magazine may never be lubricated :
the presence of a lubricant inside the magazine could
cause malfunctions.
Breech block
Guide rod
Guide rod
Hammer
Components of the hammer group may never be
lubricated : the presence of a lubricant inside the hammer
group could cause malfunctions.