Owner’s Manual 2016

19
❖
Through the magazine opening, look into the chamber
of the carbine in order to ensure that there is no
cartridge in the chamber.
If there is a cartridge in the chamber, unload the carbine as
described in § 4.5.
❖
If the chamber is empty, release the cocking handle.
❖
Ensure that the magazine is empty.
If the magazine is not empty, unload it as described in § 4.5.
If necessary, also unload the spare magazines.
❖
Set the fire selector at the position ‘1’ (single-shot).
❖
Pointing the carbine in a safe direction, pull the trigger to
decock the hammer.
❖
Set the fire selector at the position ‘S’ (safe).
❖
Fit the empty magazine back into position.
Initial cleaning
Never fire the carbine upon purchase without cleaning it
first.
❖
Carry out the cleaning and lubrication procedure (see
§ 6).
Chamber