Owner’s Manual 2013

38 39
21.4. PERIODIC LUBRICATION
The metal parts of your firearm should receive a light film of oil after the
firearm has been exposed to weather or handling.
Occasionally, a drop of lightweight gun oil may be placed inside the
receiver on the rails on which the bolt slides, and on the surface of the
magazine tube, where the forearm slides. This will help relieve friction
and ensure smooth operation.
If the firearm has been exposed to excessive dust, dirt, mud or water, the
principal working parts should be wiped clean and lubricated with a light
film of quality, lightweight gun oil.
22. REMOVAL OF THE TRIGGER GROUP AND BOLT ASSEMBLIES
BEFORE PERFORMING CLEANING PROCEDURES,
PLACE THE “SAFETY” IN THE ON SAFE POSITION. OPEN
THE ACTION AND MAKE CERTAIN YOUR SHOTGUN IS
COMPLETELY UNLOADED. KEEP THE MUZZLE POINTED IN
A SAFE DIRECTION. FAILURE TO FOLLOW THESE WARNINGS
COULD RESULT IN SERIOUS INJURY OR DEATH.
WEAR EYE PROTECTION WHEN DISASSEMBLING AND
CLEANING YOUR SHOTGUN TO PREVENT SPRINGS, SPRING
LOADED PARTS, SOLVENTS OR OTHER AGENTS FROM
CONTACTING YOUR EYES, RESULTING IN INJURY.
KEEP ALL AMMUNITION AWAY FROM THE CLEANING AREA.
NEVER TEST THE MECHANICAL FUNCTION OF YOUR
SHOTGUN WITH LIVE AMMUNITION. FAILURE TO FOLLOW
THESE WARNINGS COULD RESULT IN SERIOUS INJURY
OR DEATH.
The trigger group and bolt can be removed if the action becomes excessively
dirty or wet. If this occurs, disassemble the action for a complete cleaning
as explained in the following sections. The trigger group and bolt assembly
of the P-12 shotgun are designed to be removed in the field without
special tools.
Disassembly of the action involves the removal of the bolt assembly and the
trigger group. Disassembly beyond this point should only be performed by a
qualified gunsmith.
Rear Sight
Muzzle
Forearm
Trigger Group
Barrel
Front Sight
Magazine Spring
Magazine
Cap
FIGURE 12
P-12 shown disassembled.
Bolt Assembly
Magazine Tube
Trigger Group Pin
Cantilever Rail
Buttstock
Recoil Pad
Magazine Spring
Retainer
Choke
Tube
Firing Pin
Firing Pin
Spring