Owner’s Manual 2016

❖

Thoroughly clean all the parts of the pistol in order to remove

any dirt, debris or fouling.

❖

Apply one drop of lubricant to the outer chrome-plated surface

of the barrel, the return spring, the inside of the slide (especially

the grooves for the guide rails and the part of the bottom of the

slide which comes into contact with the hammer), the guide rails

of the frame as well as the hammer (its contact area with the

slide).

Never apply lubricant to the breech face.

❖

Reassemble the pistol (refer to § 5.1).

❖

Clean the outside of the pistol in order to remove dirt, finger

print residue and excessive lubricant.

5.4.3. Cleaning and lubrication of the magazine

Cleaning and lubrication of the magazine is only necessary in case of apparent

soiling of the magazine.

❖

Disassemble the magazine (refer to § 5.2).

❖

Thoroughly clean all the parts of the magazine (if necessary, use

solvent).

❖

Using a cleaning patch moistened with lubricant, lightly apply

lubricant to the magazine follower spring.

Wipe off excess lubricant. Ensure that the inside of the magazine is dry.

❖

Reassemble the magazine (refer to § 5.2).