Owner’s Manual 2016

❖

Grab the slide, pull slightly to the rear with your support hand

and then press the slide stop downwards in order to disengage

it (Fig. 1) or pull the slide rearwards and let go (Fig. 2) : the

slide will return to the forward position and the first round will

be loaded into the chamber.

Ensure to allow the slide to return forwards under full force of the return

spring. Failure to do so may result in a feeding failure.

During this operation, be careful not to touch the trigger.

Please note that the hammer is still in the cocked position : the pistol will

be ready to fire.

The loaded chamber indicator protrudes in order to indicate the

presence of a round in the chamber.

❖

Resume firing.

If the shooting is interrupted, even shortly, place the manual safety at the

(raised) ‘safe’ position.

After firing is completed, remove the magazine and unload the pistol.

Slide stop

Fig. 1 Fig. 2