Owner’s Manual 2016

25
4.2. Rear sight adjustment
Before carrying out the following adjustment, carry out the safety checks as
described in § 4.1.
Horizontal setting of the rear sight (Fig. 1)
The point of impact can be moved towards the right (left) by moving the rear
sight towards the right (left) by turning the windage adjustment screw ‘A’ in
the clockwise (counterclockwise) direction by using an appropriate
screwdriver.
Vertical setting of the rear sight (Fig. 2)
The point of impact can be moved down (up) by moving the rear sight down
(up) by turning the vertical adjustment screw ‘B’ in the clockwise
(counterclockwise) direction by using an appropriate screwdriver.
B
A
Rear sight
Fig. 1 Fig. 2