Owner’s Manual 2009

46
❖
Using a soft cloth or a cleaning patch (if necessary, dipped in
solvent), remove any dirt from the magazine housing of the
frame.
❖
Check the disassembled parts of the pistol for signs of wear
and/or damage.
In case of doubt about the condition of a part, consult your dealer /
departmental armorer.
❖
Thoroughly clean all the parts of the pistol in order to remove
any dirt, debris or fouling.
❖
Apply one drop of lubricant to the return spring, the inside of
the slide (especially the grooves for the guide rails), the metal
moving parts as well as the guide rails of the frame.
❖
Reassemble the pistol (refer to § 5.1).
❖
Clean the outside of the pistol in order to remove dirt, finger
print residue and excessive lubricant.
5.4.3. Cleaning and lubrication of the magazine
Cleaning and lubrication of the magazine is only necessary in case of apparent
soiling of the magazine.
❖
Disassemble the magazine (refer to § 5.2).
❖
Thoroughly clean all the parts of the magazine (if necessary, use
solvent).
❖
Using a cleaning patch moistened with lubricant, lightly apply
lubricant to the magazine follower spring.
Wipe off excess lubricant. Ensure that the inside of the magazine is dry.
❖
Reassemble the magazine (refer to § 5.2).