Owner’s Manual 2009

35
❖
Through the ejection port, look into the chamber of the pistol in
order to ensure that there is no round in the chamber.
If there is a round in the chamber, release the slide and then try to
extract and eject the remaining round by pulling the slide completely
rearwards and then releasing it.
❖
If the chamber is empty, release the slide.
❖
Doublecheck the chamber of the pistol in order to ensure
that it is empty.
❖
Unload the magazine by removing the rounds one by one.
Slightly push down on the top round and then carefully push it forwards
out and release it from the lips of the magazine.
Repeat this procedure until the magazine is completely empty.
Do not forget to unload the spare magazines as well.
❖
Insert an empty magazine into the handgrip.
Please note that a special magazine disconnect prevents to pull the
trigger if the pistol does not contain a magazine.
❖
Set the manual safety at the (lower) ‘fire’ position.